PS Generic PPE+PS - Carbon Fiber

Properties:
Fillers
carbon fiber reinforced materials
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	0.918到1.28 g/cm³
Shrinkage rate		ASTMD955	0.10到0.20 %

Mechanical properties	Test Method	Test Result
tensile strength	ASTMD638	45.5到167 MPa
elongation	ASTMD638	1.0到4.2 %
Flexural modulus	ASTMD790	6000到15900 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	43到70 J/m
Suspended wall beam without notch impact strength		ASTMD256	100到240 J/m

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTMD257	1.0E+3到2.5E+5 ohms
Volume resistivity		ASTMD257	0.30到5.1E+4 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648	98.9到178 °C
			ASTMD648	93.3到172 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top