PBT Crastin® LW9030FR BK851
89
- Properties:Low warpageFlame retardantFiller: Glass fiber reinf30% filler by weight30% filler by weight
- Usages:Electronic and electrical components
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ThermalConductivityofMelt | 0.26 W/m/K | ||
| SpecificHeatCapacity of Melt | 1900 J/kg/°C | ||
| Ejection Temperature | 170 °C | ||
| MediumDensity | 1.28 g/cm³ | ||
| Shrinkage rate | ISO 294-4 | 0.20 % | |
| ISO 294-4 | 0.70 % | ||
| density | ISO 1183 | 1.44 g/cm | |
| Shrinkage rate | ISO 294-4 | 0.65 % | |
| ISO 294-4 | 0.25 % | ||
| Melt volume flow rate | ISO 1133 | 10.0 cm3/10min | |
| density | ISO 1183 | 1.44 g/cm³ | |
| Water absorption rate | ISO 62 | 0.24 % | |
| ISO 62 | 0.72 % | ||
| Shrinkage rate | ISO 294-4 | 0.15 % | |
| ISO 294-4 | 0.20 % | ||
| Water absorption rate | ISO 62 | 0.24 % | |
| ISO 62 | 0.72 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| FMVSS flammability | FMVSS302 | B | |
| UL flame retardant rating | IEC 60695-11-10,-20 | HB | |
| IEC 60695-11-10,-20 | HB | ||
| UL 94 | HB | ||
| UL 94 | HB | ||
| burning rate | ISO 3795 | 42 mm/min | |
| Limiting Oxygen Index | ISO 4589-2 | 19 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Emissions of Organic Compounds | VDA277 | 90.0 µgC/g |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-1 | 19 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 10 KJ/m | |
| Charpy Notched Impact Strength | ISO 179 | 10 KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179 | 60 KJ/m | |
| Charpy Notched Impact Strength | ISO 179 | 9.3 KJ/m | |
| Tensile stress | ISO 527-1 | 130 MPa | |
| Tensile strain | ISO 527-1 | 2.5 % | |
| bending strength | ISO 178 | 190 MPa | |
| Impact strength of simply supported beam without notch | ISO 179 | 66 KJ/m | |
| Tensile creep modulus | ISO 899-1 | 9000 MPa | |
| ISO 899-1 | 7300 MPa | ||
| Tensile modulus | ISO 527-1 | 9500 MPa | |
| bending strength | ISO 178 | 190 Mpa | |
| Flexural modulus | ISO 178 | 8500 Mpa | |
| Tensile creep modulus | ISO 899-1 | 7300 Mpa | |
| ISO 899-1 | 9000 Mpa | ||
| Tensile strain | ISO 527-2 | 2.5 % | |
| tensile strength | ISO 527-2 | 130 Mpa | |
| Tensile modulus | ISO 527-2 | 9500 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180/1U | 50 kJ/m² | |
| ISO 180/1U | 50 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 8.0 kJ/m² | |
| ISO 180/1A | 8.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 60 kJ/m² | |
| ISO 179/1eU | 65 kJ/m² | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 10 kJ/m² | |
| ISO 179/1eA | 9.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 1 | |
| Dissipation Factor | IEC 60250 | 2.4E-03 | |
| IEC 60250 | 0.017 | ||
| relative permittivity | IEC 60250 | 3.60 | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | IEC 60243-1 | 36 KV/mm | |
| relative permittivity | IEC 60250 | 3.90 | |
| Surface Resistivity | IEC 60093 | 1E+14 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UL 94 | HB | ||
| melting temperature | ISO 3146 | 225 ℃ | |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000100 cm/cm/°C | |
| Heat distortion temperature | ISO 75B-1 | 182 ℃ | |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000025 cm/cm/°C | |
| Heat distortion temperature | ISO 75B-1 | 215 ℃ | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1E-04 cm/cm/°C | |
| ISO 11359-2 | 2.5E-05 cm/cm/°C | ||
| melting temperature | ISO 11357-3 | 225 °C | |
| vicat | ISO 306/B50 | 150 °C | |
| Glass Transition Temperature | ISO 11357-2 | 120 °C | |
| Heat distortion temperature | ISO 75-2/A | 170 °C | |
| ISO 75-2/B | 215 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top