MDPE TOTAL Polyethylene Lumicene® M 3410 EP (US)
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.934 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.90 g/10min | |
| ASTMD1238 | 30 g/10min |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Film thickness - tested | 25 µm | ||
| Secant modulus | ASTMD882A | 365 MPa | |
| ASTMD882A | 386 MPa | ||
| tensile strength | ASTMD882A | 44.1 MPa | |
| ASTMD882A | 42.1 MPa | ||
| Tensile strain MD | ASTMD882A | 400 % | |
| Tensile strain | ASTMD882A | 650 % | |
| Falling hammer impact | ASTMD1709A | 60 g | |
| ElmendorfTearStrength-MD | ASTMD1922 | 55 g | |
| ElmendorfTearStrength-TD | ASTMD1922 | 400 g | |
| Water vapor permeability | ASTMF1249 | 10 g/m²/24hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD3417 | 124 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top