Technical Data Sheet
thermosetting | Test Condition | Test Method | Test Result |
---|
STORAGE STABILITY | | ASTM D2471 | 6.0 min |
Thermosetting mixed viscosity | | ASTM D2393 | 600 cP |
stripping time | | | 60 min |
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTM D1475 | 1.12 g/cm³ |
Specific volume | | ASTM D1475 | 0.892 cm³/g |
Shrinkage rate | | ASTM D2566 | 0.42 % |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | | ASTM D2240 | 75 |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
Mixing Ratio | | | 75A:100Bbyweight |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | ASTM D638 | 869 MPa |
tensile strength | Break | ASTM D638 | 18.8 MPa |
elongation | Break | ASTM D638 | 20 % |
Flexural modulus | | ASTM D790 | 1170 MPa |
bending strength | | ASTM D790 | 38.7 MPa |
Compression Modulus | | ASTM D695 | 414 MPa |
compressive strength | | ASTM D695 | 37.6 MPa |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 47.2 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.