LLDPE RG50035 SABIC SAUDI

Form：Granules | Grade：Rotational molding grade

Properties:

low densityantioxidant

Typical Applications:

Electric wireCable ApplicationsMixtureMasterbatch

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electric wire \| Cable Applications \| Mixture \| Masterbatch
Properties:	low density \| antioxidant

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
purpose			大型工业和农业用储罐、垃圾箱、化学品装用桶、玩具
characteristic			ECSR性能优异、高硬度、细粒树脂
Other performance	Test Condition	Test Method	Test Result	Test Unit
Pourability		ASTM D-1895	16	sec
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	5.0	g/10min
Apparent density		ASTM D-1895	0.42	g/cm
density		ASTM D-1505	0.935
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638/ISO 527	18	kg/cm²(MPa)[Lb/in²]
Tensile modulus		ASTM D638/ISO 527	19.3	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	700	%
Secant modulus	1%Strain	ASTM D-790	500	Mpa
elongation	Break	ASTM D-638	700	%
tensile strength	Break	ASTM D-638	11.5	%
bending strength		ASTM D-790	19.3	Mpa
Bending modulus		ASTM D-790	724	Mpa
Shore hardness		ASTM D-2240	69
tensile strength	Yield	ASTM D-638	18	Mpa
Bending modulus		ASTM D790/ISO 178	724	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D-1525	115	°C
Vicat softening temperature	Vicat softening temperature		ASTM D1525/ISO R306	115	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238/ISO 1133	5	g/10min
Environmental stress cracking resistance		ASTM D-1693A	>300	hrs
density		ASTM D792/ISO 1183	0.935

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top