PC NCF15 FR
0
- Usages:Electromagnetic shielding(EMI)flame retardant performance
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.2 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.33 g/cm3 | |
| Water absorption rate | ASTM D-570 | 0.1 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D-256 | 64.9 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 347 J/m | |
| tensile strength | ASTM D-638 | 126 MPa | |
| elongation at break | ASTM D-638 | 2.8 % | |
| Flexural modulus | ASTM D-790 | 7580 MPa | |
| bending strength | ASTM D-790 | 152 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1E+04 ohms | |
| Volume resistivity | ASTM D-257 | 1E+04 ohm·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 144 ℃ | |
| UL flame retardant rating | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top