SPS XAREC™ S120 IDEMITSU JAPAN
4
- Properties:Glass fiber reinforcedHigh temperature resistan
- Usages:Electrical applicationsHousehold daily necessities
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.050 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785 | 45 M-scale | |
| bending strength | ASTM D-790 | 125 Mpa | |
| Bending modulus | ASTM D-790 | 4500 Mpa | |
| elongation at yield | ASTM D-638 | 3.0 % | |
| tensile strength | Yield | ASTM D-638 | 75.0 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000039 cm/cm/℃ |
| Hot deformation temperature | 1.80MPa,Unannealed | ASTM D-648 | 170 °C |
| 0.45MPa,Unannealed | ASTM D-648 | 260 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | Flow | ASTM D-955 | 0.50 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dielectric loss | 1E+6Hz | ASTM D-150 | 0.0010 |
| Dielectric constant | 1E+6Hz | ASTM D-150 | 2.800 |
| Dielectric strength | ASTM D-149 | 47.0 KV/mm | |
| Volume resistivity | ASTM D-257 | 1E+16 ohm.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.