PC TARFLON™ MD1500 FIPC TAIWAN
11
- Properties:High mobilityoptical performance High purity
- Usages:Media packagingMedia packagingCDCDRdvd disc
- Certificates:TDS
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Refractive index | ASTM D542 | 1.585 | |
| transmissivity | ASTM D1003 | 89.0 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2200 Mpa | |
| tensile strength | Yield | ISO 527-2 | 60.0 Mpa |
| Break | ISO 527-2 | 58.0 Mpa | |
| Tensile strain | Break | ISO 527-2 | 90 % |
| Bending modulus | ISO 178 | 2400 Mpa | |
| bending strength | ISO 178 | 95.0 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 125 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 6.5E-05 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 300°C/1.2kg | ISO 1133 | 67 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.50-0.70 % |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.23 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Arc resistance | ASTM D495 | 110 sec | |
| Volume resistivity | IEC 60093 | >1.0E+17 ohms·cm | |
| Dielectric strength | 1.60mm | IEC 60243-1 | 30 KV/mm |
| Dielectric constant | 100Hz | IEC 60250 | 2.91 |
| 1MHz | IEC 60250 | 2.85 | |
| Dissipation factor | 100Hz | IEC 60250 | 6.6E-04 |
| 1MHz | IEC 60250 | 9.2E-03 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 50 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.