PA66 PA66-FG725
0
- Properties:25% glass fiber reinforced red phosphorus flame retardant grade
- Usages:Mainly used for products with flame retardant requirements and high strengthsuch as switch setsconnectorsspoolsterminalsetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Parallel molding shrinkage rate | ASTM D955 | 0.6 % | |
| density | ASTM D792 | 1.34 g/cm | |
| Water absorption rate | ASTM D570 | 1.2～1.6 % | |
| Vertical molding shrinkage rate | ASTM D955 | 0.3 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame retardancy | 级 | UL94 V0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 150 MPa | |
| elongation | Break | ASTM D638 | 2.5 % |
| bending strength | ASTM D790 | 220 MPa | |
| Flexural modulus | ASTM D790 | 8500 MPa | |
| IZOD notch impact strength | ASTM D256 | 11 KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Ω·m | IEC 60093 10 | ||
| Compared to the Leakage Tracking Index (CTI) | 伏 | UL-746A 1 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 250 ℃ | |
| ASTM D648 | 260 ℃ | ||
| melting point | ASTM D789 | 260 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top