PC 261-3 STYRON US

Form：Granules | Grade：Injection grade

Properties:

transparentheat-resistingHigh impact resistanceExcellent heat resistanceGood transparency and ext

Typical Applications:

Food containerscontainerLarge food containers

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Food containers \| container \| Large food containers
Properties:	transparent \| heat-resisting \| High impact resistance \| Excellent heat resistance \| Good transparency and ext

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index		ASTM D542	1.586
Transmittance rate		ASTM D1003	89	%
turbidity		ASTM D1003	0.7-1.5	%
Other performance	Test Condition	Test Method	Test Result	Test Unit
Limiting Oxygen Index (LOI)		ASTM D2863	26	%
Average degree of combustion		ASTM D638	25	mm
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638	2480	Mpa
bending strength		ASTM D790	96	Mpa
Bending modulus		ASTM D790	2410	Mpa
Impact strength of cantilever beam gap		ASTM D256	950	J/m
tensile strength	Yield	ASTM D638	60	Mpa
Rockwell hardness		ASTM D785	74	M
tensile strength	Break	ASTM D638	72	Mpa
elongation at yield		ASTM D638	6	%
Elongation at Break		ASTM D638	150	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Annealed，0.45Mpa	ASTM D648	146	°C
	Hot deformation temperature	Annealed，1.8Mpa	ASTM D648	143	°C
	Hot deformation temperature	Hot deformation temperature	Unannealed，1.8Mpa	ASTM D648	143	°C
Vicat softening temperature		ASTM D1525	151	°C
Linear coefficient of thermal expansion		ASTM D696	68	×10
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.2
Shrinkage rate		ASTM D955	0.005-0.007	mm/mm
Water absorption rate	23℃,24H	ASTM D570	0.15	%
Water absorption rate	Water absorption rate	23℃,50%相对湿度	ASTM D570	0.32	%
melt mass-flow rate		ASTM D1238	2.6	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Glow wire combustion index (GWFI)		IEC 695-2-1	850	°C
Compared to the Leakage Traceability Index (CTI)		IEC 112	250	V
Dielectric strength		ASTM D149	17	KV/mm
Volume resistivity		ASTM D257	2×10	Ω.cm
Dissipation factor		ASTM D150	3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top