Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.52到1.58 g/cm³ |
| Ash Content | | ISO3451 | 20.0到24.0 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638 | 85.0 MPa |
| elongation | Break | ASTMD638 | 1.8 % |
| Flexural modulus | | ASTMD790 | 6800 MPa |
| bending strength | | ASTMD790 | 135 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 5.50 kJ/m² |
| Suspended wall beam without notch impact strength | | ASTMD256 | 48.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 18 kV/mm |
| dielectric constant | | ASTMD150 | 3.40 |
| Dissipation Factor | | ASTMD150 | 0.020 |
| Dissipation Factor | | ASTMD150 | 0.020 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 195 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare