MMW-HDPE TOTAL Polyethylene HDPE 5908
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.959 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 0.80 g/10min | |
| ASTM D1238 | 22 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D523 | 50 | |
| Haze ratio | ASTM D1003 | 15 % |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D882A | 62.1 MPa | |
| Elmendorf tear strength | ASTM D1922 | 390 g | |
| Water Vapor Transmission Rate | ASTME96 | 7.8 g/m²/24hr | |
| film thickness | 25 µm | ||
| Secant modulus | ASTM D882A | 1030 MPa | |
| ASTM D882A | 689 MPa | ||
| ASTM D882A | 883 MPa | ||
| ASTM D882A | 703 MPa | ||
| tensile strength | ASTM D882A | 31.0 MPa | |
| ASTM D882A | 31.0 MPa | ||
| ASTM D882A | 24.1 MPa | ||
| elongation | ASTM D882A | 600 % | |
| ASTM D882A | 300 % | ||
| Elmendorf tear strength | ASTM D1922 | 24 g |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ASTM D3417 | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top