PP 8300J
0
- Properties:Hot formingspray forming
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 2.4-3 g/10min | |
| density | ASTM D792 | 0.9 G/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 1150 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256 | 180 | |
| ASTM D256 | 55 | ||
| Shore hardness | ISO 868 | 40-88 R |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 64-90 ℃ | |
| vicat | ISO 306 | 126-150 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top