
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 85 | Mpa |
| Bending modulus | 23°C | ASTM D790 | 2500 | Mpa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 750 | J/m |
| tensile strength | 23°C | ASTM D638 | 54 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 5 | % |
| Tensile modulus | 23°C | ASTM D638 | 2500 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 111 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD24hr | ASTM D995 | 0.50 | % |
| TD24hr | ASTM D995 | 0.70 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 1.2E+16 | Ω.cm | |
| Surface resistivity | ASTM D257 | 1.2E+16 | Ω.cm | |
| Dielectric constant | ASTM D150 | 3.10 | 1GHz | |
| Dissipation factor | ASTM D150 | 6E-03 | 1GHz | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | V-1 | 1.0mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.