
PE AEI TP543C UK AEI Compounds
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 41 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | IEC 60811-1-1 | 13.0 | MPa | |
| Tensile strain | Break,-30°C2 | IEC 60811-1-4 | 50 | % |
| Break | IEC 60811-1-1 | 170 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Temperature index | ISO 4589-3 | >300 | °C | |
| Cold bend | -30°C | IEC 60811-1-4 | pass | |
| deformation | 90°C | IEC 60811-3-1 | 35 | % |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 150°C/21.6kg | Internal Method | 7.0 | g/10min |
| density | BS2782620A | 1.54 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 90°C,Ki | IEC 60502 | 5.7E+07 | ohms·cm |
| 20°C,Ki | IEC 60502 | 7.7E+09 | ohms·cm | |
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Tensile stress change rate | 100°C,168hr,Break | IEC 60811-1-2 | -12 | % |
| Change rate of tensile strength in air | 100°C,168hr | IEC 60811-1-2 | 12 | % |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| tear strength | BS6469 | 6 | N/mm | |
| HalogenAcidGasEvolution | IEC 60754-1 | <0.50 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.