PC 3412R-131 SABIC INNOVATIVE JAPAN

Form：Granules | Grade：Injection grade

Properties:

Flame retardantenhanceGlass fiber reinforced

Typical Applications:

Automotive sector

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Automotive sector
Properties:	Flame retardant \| enhance \| Glass fiber reinforced

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D-570	0.16	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D-790	131	Mpa
tensile strength		ASTM D-638	110	Mpa
Rockwell hardness		ASTM D-785	122
elongation	Break	ASTM D-638	5	%
Impact strength of cantilever beam gap	23°C	ASTM D-256	107	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa	ASTM D-648	148	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa	ASTM D-648	146	°C
Linear coefficient of thermal expansion		ASTM E-831	2.7×10	1/°C
Vicat softening temperature		ASTM D-1525	165	°C
Long term use temperature		UL 746B	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3.2mm	ASTM D-955	1-3
Bending modulus		ASTM D-790	5512	Mpa
enhance			20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	ASTM D-150	0.0073
Dielectric constant	1MHz	ASTM D-150	3.13
Dissipation factor	60Hz	ASTM D-150	0.0009
Dielectric constant	60Hz	ASTM D-150	3.17
Volume resistivity		ASTM D-257	1.0×10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top