PE Alloy Stat-Rite® S-102
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.960 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 1.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmissivity | ASTM D1003 | 84.0 % | |
| Haze ratio | ASTM D1003 | 37 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Outgassing | 内部方法 | IDPAlloy | |
| IonicContent | 内部方法 | <0.0100 µg/cm² | |
| 内部方法 | <0.0100 µg/cm² | ||
| 内部方法 | <0.0100 µg/cm² | ||
| 内部方法 | <0.0100 µg/cm² | ||
| 内部方法 | <0.0100 µg/cm² | ||
| 内部方法 | <0.0100 µg/cm² | ||
| 内部方法 | <0.0100 µg/cm² | ||
| Outgassing | 内部方法 | 445 ng/cm² | |
| 内部方法 | 22.0 ng/cm² | ||
| 内部方法 | 467 ng/cm² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ASTM D638 | 15.2 MPa |
| elongation | Break | ASTM D638 | >500 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ESDS11.12 | 8E+09 ohms·cm | |
| StaticDecay | CPM | <2.0 sec | |
| Volume resistivity | ESDS11.11 | 4E+08 ohms | |
| Tribocharge-NitrileGloves | 内部方法 | <20.0 V |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top