PP LUBLENE GC30 NATURAL
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183/A | 1.10到1.14 g/cm³ |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 8.0到9.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 40到50 kJ/m² | |
| Impact strength of cantilever beam gap | ASTMD256A | 80到90 J/m | |
| ASTMD256 | 40到50 kJ/m² | ||
| ASTMD256 | 8.0到9.0 kJ/m² | ||
| ISO180/A | 8.0到9.0 kJ/m² | ||
| ISO180 | 40到50 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1A/1 | 4500到5500 MPa | |
| Tensile stress | Yield | ISO527-2/1A/5 | 65.0到75.0 MPa |
| Break | ISO527-2/1A/5 | 65.0到75.0 MPa | |
| Tensile strain | Yield | ISO527-2/1A/5 | 2.5到3.0 % |
| Break | ISO527-2/1A/5 | 2.5到3.0 % | |
| Flexural modulus | ISO178 | 4000到5000 MPa | |
| Bending stress | ISO178 | 70.0到80.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 145到155 °C | ||
| ISO75-2/B | 145到155 °C | ||
| ASTMD648 | 130到140 °C | ||
| vicat | ISO306/A120 | 155到165 °C | |
| ISO306/B120 | 125到135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top