PA66 TECHNYL® A218V35
75
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 干燥｜0.75 % | |
| ISO 622 | 干燥｜5.5 % | ||
| ISO 622 | 干燥｜1.4 % | ||
| viscosity number | ISO 307,1157,16282 | 干燥｜142 cm³/g |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 干燥｜23 % | |
| UL flame retardant rating | UL 94 | 干燥｜HB | |
| Normal combustion performance with a thickness of 1.6mm | 干燥｜HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA2 | 调节后｜18.5 kJ/m² | |
| ISO 179/1eU | 干燥｜95 kJ/m² | ||
| ISO 179/1eU | 调节后｜100 kJ/m² | ||
| ISO 179/1eU2 | 干燥｜95.0 kJ/m² | ||
| ISO 179/1eU2 | 调节后｜100 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 干燥｜13 kJ/m² | |
| ISO 180/1A | 调节后｜18 kJ/m² | ||
| Tensile stress | ISO 527-2/1A | 调节后｜150 Mpa | |
| ISO 527-22 | 干燥｜190 Mpa | ||
| ISO 527-22 | 调节后｜145 Mpa | ||
| Tensile strain | ISO 527-2/1A2, ISO 527-22 | 干燥｜3.0 % | |
| ISO 527-2/1A2, ISO 527-22 | 调节后｜4.0 % | ||
| Flexural modulus | ISO 178 | 干燥｜9500 Mpa | |
| ISO 178 | 调节后｜6800 Mpa | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 干燥｜14 kJ/m² | |
| ISO 179/1eA | 调节后｜19 kJ/m² | ||
| ISO 179/1eA2 | 干燥｜13.5 kJ/m² | ||
| Tensile modulus | ISO 527-2/1A2 ISO 527-22 | 干燥｜11400 Mpa | |
| ISO 527-2/1A2 ISO 527-22 | 调节后｜8700 Mpa | ||
| Tensile stress | ISO 527-2/1A | 干燥｜210 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 干燥｜6.0E+14 Ohm | |
| IEC 60093 | 调节后｜1.0E+12 Ohm | ||
| IEC 600932 | 调节后｜1.0E+12 Ohm | ||
| Volume resistivity | IEC 60093 | 干燥｜1.0E+15 ohm.cm | |
| IEC 60093 | 调节后｜1.0E+13 ohm.cm | ||
| IEC 600932 | 干燥｜1.0E+13 ohm.m | ||
| IEC 600932 | 调节后｜1.0E+11 ohm.m | ||
| IEC 60250 | 干燥｜3.70 | ||
| IEC 60250 | 调节后｜4.00 | ||
| IEC 60250 2 | 干燥｜4.00 | ||
| IEC 60250 2 | 调节后｜9.00 | ||
| IEC 60250 2 | 干燥｜3.70 | ||
| IEC 60250 2 | 调节后｜4.00 | ||
| Dissipation Factor | IEC 60250 | 干燥｜0.010 | |
| IEC 60250 | 调节后｜0.11 | ||
| IEC 60250 2 | 干燥｜0.010 | ||
| IEC 60250 2 | 调节后｜0.15 | ||
| IEC 60250 2 | 干燥｜0.010 | ||
| IEC 60250 2 | 调节后｜0.11 | ||
| CTI | IEC 60112 | 干燥｜450 V | |
| IEC 60112 | 调节后｜450 V | ||
| IEC 601122 | 调节后｜450 V | ||
| electric strength | IEC 60243-1 | 干燥｜34 KV/mm | |
| IEC 60243-1 | 调节后｜29 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melting temperature DSC | ISO 3146 | 干燥｜263 °C | |
| ISO 11357-32 | 干燥｜260 °C | ||
| Linear expansion coefficient | ISO 11359-22 | 干燥｜0.000022 cm/cm/ ℃ | |
| ISO 11359-2 | 干燥｜0.000022 cm/cm/ ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top