EHMWPE BSR
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| tensile strength | ASTM D638 | 53.0 MPa | |
| ASTM D638 | 49.0 MPa | ||
| melting temperature | 136 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 9.2E-04 cm/cm/°C | |
| ASTM D696 | 1.5E-04 cm/cm/°C | ||
| Surface Resistivity | ASTM D257 | 1E+03 ohms | |
| ASTM D257 | 1E+03 ohms | ||
| ASTM D257 | 1E+03 ohms | ||
| Volume resistivity | ASTM D257 | 6E+07 ohms·cm | |
| Dissipation Factor | ASTM D150 | 0.0 | |
| ASTM D150 | -1E-03 | ||
| StaticDecay | <10 msec | ||
| <10 msec | |||
| <10 msec | |||
| tensile strength | ASTM D638 | 44.0 MPa | |
| elongation | ASTM D638 | 60 % | |
| ASTM D638 | 460 % | ||
| ASTM D638 | 470 % | ||
| coefficient of friction | ASTM D1894 | 0.10to0.22 | |
| ASTM D1894 | 0.050to0.10 | ||
| ASTM D1894 | 0.050to0.080 | ||
| ASTM D1894 | 0.14 | ||
| ASTM D1894 | 0.13 | ||
| ASTM D1894 | 0.14 | ||
| ASTM D1894 | 0.16 | ||
| ASTM D1894 | 0.16 | ||
| ASTM D1894 | 0.16 | ||
| Impact strength of cantilever beam gap | ASTM D256 | 80 J/m | |
| melting temperature | 134 °C | ||
| density | ASTM D792 | 0.930 g/cm³ | |
| Crystallinity | ASTM D3417 | 48 % | |
| ASTM D3417 | 47 % | ||
| ASTM D3417 | 50 % | ||
| relative viscosity | ASTM D4020 | 230to350 cm³/g | |
| ASTM D4020 | 230to350 cm³/g | ||
| tensile strength | ASTM D638 | 23.0 MPa | |
| ASTM D638 | 20.0 MPa | ||
| ASTM D638 | 22.0 MPa | ||
| relative viscosity | ASTM D4020 | 230to350 cm³/g | |
| Shore hardness | ASTM D2240 | 65 | |
| ASTM D2240 | 65 | ||
| ASTM D2240 | 65 | ||
| Volume resistivity | ASTM D257 | 1.5E+07 ohms·cm | |
| ASTM D257 | >2.0E+7 ohms·cm | ||
| dielectric strength | ASTM D149 | 14 kV/mm | |
| dielectric constant | ASTM D150 | 2.39 | |
| ASTM D150 | 2.29 | ||
| ASTM D150 | 2.28 | ||
| Dissipation Factor | ASTM D150 | -1E-03 | |
| ASTM D150 | -1E-03 | ||
| ASTM D150 | -2E-03 | ||
| ASTM D150 | -1E-03 | ||
| Tensile modulus | ASTM D638 | 725 MPa | |
| ASTM D638 | 731 MPa | ||
| ASTM D638 | 672 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top