PEI ULTEM™ MD131C-7101
22
- Properties:Thermal stabilityHigh temperature resistan
- Usages:Automotive ApplicationsElectrical applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.27 g/cm³ | |
| Shrinkage rate | 内部测试方法 | 0.5-0.7 % | |
| Water absorption rate | ISO 62 | 1.25 % | |
| ISO 62 | 0.7 % | ||
| Network Finance Index | ISO 1133 | 25 cm3/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527 | 3200 Mpa | |
| tensile strength | ISO 527 | 105 Mpa | |
| elongation | ISO 527 | 6 % | |
| bending strength | ISO 178 | 140 Mpa | |
| Flexural modulus | ISO 178 | 3200 Mpa | |
| Impact strength of cantilever beam gap | ISO 180 | 4 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75 | 195 °C | |
| vicat | ISO 306 | 210 °C | |
| Linear coefficient of thermal expansion | ISO 11359 | 0.000050 cm/cm/℃ | |
| ISO 11359 | 0.000050 cm/cm/℃ | ||
| Ball indentation test | ISO 11359-2 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top