
GPPS GP5250 FCFC TAIWAN
218
Form:Granules | Grade:Injection grade
Properties:
currencyInjection molding
Typical Applications:
Food packagingFood containersToyMonitorAudiotapechipMakeup productscontainerFood containersMonitorToyCoat hangerLighting decorationCD caseCassette cassetteCosmetic containers
Product Description
Certificates(1)
Datasheet
Alternative Model(23)
Product Description
| Typical Applications: | Food packaging | Food containers | Toy | Monitor | Audiotape | chip | Makeup products | container | Food containers | Monitor | Toy | Coat hanger | Lighting decoration | CD case | Cassette cassette | Cosmetic containers |
| Properties: | currency | Injection molding |
Certificates

Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Combustibility | 1/16" | HBNC | UL-94FILE NO.E117170 | |
| Residual monomer | 700 | ppm max | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D-1238 | 7.0 | g/10min. | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | ASTM D-638 | 2.1 | % | |
| Impact strength of cantilever beam gap | ASTM D-256 | 1.8(18) | Kg-cm/cm(J/m) | |
| Tensile modulus | ASTM D-638 | 1.8(1770) | kg/cm | |
| Bending modulus | ASTM D-790 | 3.4(3330) | kg/cm | |
| tensile strength | ASTM D-638 | 420(41) | kg/cm | |
| bending strength | ASTM D-790 | 800(78) | kg/cm | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D-648 | 93 | °C | |
| Hot deformation temperature | HDT | ASTM D-648 | 88 | °C |
| HDT | ASTM D-1525 | 88 | °C | |
| Vicat softening temperature | ASTM D-1525 | 93 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.