
PVC S-75 FPC TAIWAN
47
Form:Granules | Grade:Injection grade
Properties:
wear resistantUV resistance
Typical Applications:
Wire and cableSoft adhesive tapeRubber skinHigh insulation cables etc
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Wire and cable | Soft adhesive tape | Rubber skin | High insulation cables | etc |
| Properties: | wear resistant | UV resistance |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Number of impurity particles | 合格品|≤80 | 个 | ||
| Whiteness | 160℃,10min | 优等品|≥80 | % | |
| 160℃,10min | 一级品|≥80 | % | ||
| 160℃,10min | 合格品|≥78 | % | ||
| Number of impurity particles | 一级品|≤30 | 个 | ||
| 优等品|≤16 | 个 | |||
| Sieve residue | 0.63mm筛孔 | 合格品|≥90 | % | |
| 0.63mm筛孔 | 一级品|≥95 | % | ||
| 0.63mm筛孔 | 优等品|≥95 | % | ||
| 0.25mm筛孔 | 合格品|≤2.0 | % | ||
| 0.25mm筛孔 | 一级品|≤1.0 | % | ||
| 0.25mm筛孔 | 优等品|≤1.0 | % | ||
| Plasticizer absorption amount | 100gResin | 合格品|≥29 | g | |
| 100gResin | 一级品|≥29 | g | ||
| 100gResin | 优等品|≥29 | g | ||
| Conductivity of water extract | 合格品|≤5 | μs/cm·g | ||
| 一级品|≤5 | μs/cm·g | |||
| 优等品|≤5 | μs/cm·g | |||
| fisheye | 合格品|≤90 | 个/400cm2 | ||
| 一级品|≤40 | 个/400cm2 | |||
| 优等品|≤20 | 个/400cm2 | |||
| Residual vinyl chloride content | 合格品|≤2 | ppm | ||
| 一级品|≤2 | ppm | |||
| 优等品|≤2 | ppm | |||
| Volatile compounds | 合格品|≤0.3 | % | ||
| Stickiness | 优等品|136-143 | ml/g | ||
| 一级品|73-74 | ml/g | |||
| 合格品|1400-1500 | ml/g | |||
| Volatile compounds | 优等品|≤0.3 | % | ||
| 一级品|≤0.3 | % | |||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Apparent density | 合格品|0.45-0.51 | g/ml | ||
| 一级品|0.45-0.51 | g/ml | |||
| 优等品|0.45-0.51 | g/ml |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.