
PC LS2 SABIC INNOVATIVE US
39
Form:Granules | Grade:Injection grade
Properties:
transparentenhanceWeather resistanceUV resistance
Typical Applications:
CastersOptical level
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Casters | Optical level |
| Properties: | transparent | enhance | Weather resistance | UV resistance |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| transparency | ASTM D-1003 | 89 | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D-1238 | 11 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ASTM D-790 | 2343 | Mpa | |
| Elongation at Break | Break点 | ASTM D-638 | 130 | % |
| bending strength | ASTM D-790 | 96 | Mpa | |
| tensile strength | 屈伏点 | ASTM D-638 | 62 | Mpa |
| Impact strength of cantilever beam gap | Notched23°C | ASTM D-256 | 800 | J/m |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Long term use temperature | UL 746B | 100 | °C | |
| UL flame retardant rating | UL 94 | V-2 | ||
| UL 94 | 1.5 | mm | ||
| Hot deformation temperature | 1.8MPa | D648 | 132 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 | 10× |
| Water absorption rate | ASTM D-570 | 0.15 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.