Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Molten Volume Flow Rate (MVR) | | ISO 1133 | 18.5 cm3/10min |
| Water absorption rate | | ISO 62 | 1.8 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Flammability level | | IEC 60695-11-10, -20 | HB |
| Flammability level | | IEC 60695-11-10, -20 | HB |
| Limiting Oxygen Index | | ISO 4589-2 | 22 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 540 Mpa |
| Tensile stress | | ISO 527-2 | 31.0 Mpa |
| Tensile strain | | ISO 527-2 | 35 % |
| Nominal tensile fracture strain | | ISO 527-2 | > 50 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | -- ohms |
| Volume resistivity | | IEC 60093 | -- ohms·cm |
| dielectric strength | | IEC 60243-1 | -- KV/mm |
| | IEC 60250 | 7.00 |
| | IEC 60250 | 3.00 |
| Dissipation Factor | | IEC 60250 | 0.19 |
| Dissipation Factor | | IEC 60250 | 0.061 |
| CTI | | IEC 60112 | -- V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/B | 135 °C |
| | ISO 75-2/A | 47.0 °C |
| vicat | | ISO 306/B50 | 145 °C |
| Melting temperature 2 | | ISO 11357-3 | 187 °C |
| | ISO 11359-2 | 1.0E-4 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare