PUR-Ether//TDI L 100 CHEMTURU USA

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
Curing time	100°C		1.0	hr
elastomer	Test Condition	Test Method	Test Result	Test Unit
tear strength	Split	ASTM D470	13	kN/m
Permanent compression deformation	70°C,22hr	ASTM D395B	27	%
Shore hardness		ASTM D2632	45	%
Kappa modulus	-57°C	ASTM D1043	210	MPa
	Kappa modulus	-40°C	ASTM D1043	73.1	MPa
		Kappa modulus	-18°C	ASTM D1043	22.4	MPa
		Kappa modulus	Kappa modulus	24°C	ASTM D1043	17.9	MPa
tensile strength	100%Strain	ASTM D412	7.58	MPa
	tensile strength	300%Strain	ASTM D412	14.5	MPa
	tensile strength	tensile strength		ASTM D412	31.0	MPa
elongation	Break	ASTM D412	450	%
tear strength	--2	ASTM D624	70.1	kN/m
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	Pot Life(100°C)		10	min
	Thermosetting components	按重量计算的混合比		100
		Thermosetting components	Hardener		按重量计算的混合比:12
			Thermosetting components	Demold Time(100°C)		30to45	min
			Thermosetting components	Thermosetting components	后固化时间(70°C)		16	hr
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D746	<-70.0	°C
Linear coefficient of thermal expansion	MD：-36to0°C	ASTM D696	2.6E-04	cm/cm/°C
	Linear coefficient of thermal expansion	MD：0to24°C	ASTM D696	1.8E-04	cm/cm/°C
		Linear coefficient of thermal expansion	MD：24to100°C	ASTM D696	1.7E-04	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：100to150°C	ASTM D696	1.6E-04	cm/cm/°C
thermal conductivity		ASTMC177	0.13	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.10	g/cm³
Shrinkage rate	MD	ASTM D955	1.2	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA	ASTM D2240	90
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
AbrasionIndex-NBS			175

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top