LDPE NA112-27 USI TAIWAN

Form：Granules | Grade：Injection grade

Properties:

Extrusion level

Typical Applications:

Blown filmfilmFor blowing out thin films

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Blown film \| film \| For blowing out thin films
Properties:	Extrusion level

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ASTM D-2117	108	°C
gloss	60℃	ASTM D-523	100	%
spray		ASTM D-1003	6.0	%
Friction coefficient		ASTM D-1894	0.20/0.16	μS/μK
Shore hardness		ASTM D-2240	52	D
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-1505	0.921
melt mass-flow rate		ASTM D-1238	3	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	铸模成型，Break	ASTM D-638	125	kg/cm
	tensile strength	薄膜DM/DT，Break	ASTM D-882	190/154	kg/cm
	tensile strength	tensile strength	薄膜DM/DT，Yield	ASTM D-882	91/91	kg/cm
Impact strength of cantilever beam gap		ASTM D-1709	110	G/50F
elongation	薄膜DM/DT	ASTM D-882	340/550	%
tensile strength	铸模成型，Yield	ASTM D-638	105	kg/cm
elongation	铸模成型	ASTM D-638	440	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D-1525	100	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top