PP H200MA RELIANCE INDIA

Form：Granules | Grade：Injection grade

Properties:

Antistatic

Typical Applications:

containerThin walled products

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	container \| Thin walled products
Properties:	Antistatic

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
purpose			塞子.薄壁容器.多槽塑模。
characteristic			良好的流动性.含搞静电剂。
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃，2.16kg	ASTM D-1238	20.0	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break	50mm/min	ASTM D-638	11	%
Bending modulus	1% secant	ASTM D-790A	1650	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	27	J/m
tensile strength	50mm/min，Break	ASTM D-638	32	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	455KPa	ASTM D-648	104	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238/ISO 1133	25	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top