NBR NANCAR® 1052M43
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 0.980 g/cm³ | ||
| Mooney viscosity | ASTMD1646 | 43 MU | |
| AcrylonitrileContent-Bound | 内部方法 | 33.0 % | |
| Stabilizer | Non-staining | ||
| Soluble inMEK | 100 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 69 | ||
| ASTMD2240 | 70 | ||
| ASTMD2240 | 71 |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ASTMD412 | 8.53 MPa | |
| ASTMD412 | 9.12 MPa | ||
| tensile strength | ASTMD412 | 23.8 MPa | |
| ASTMD412 | 26.5 MPa | ||
| ASTMD412 | 26.8 MPa | ||
| elongation | ASTMD412 | 750 % | |
| ASTMD412 | 690 % | ||
| ASTMD412 | 650 % | ||
| tear strength | ASTMD624 | 61.8 kN/m | |
| compression set | ASTMD395 | 57 % | |
| Tensile stress | ASTMD412 | 6.86 MPa |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| The rate of change in hardness of a hardness tester | ASTMD471 | 1.0 | |
| Change rate of tensile strength in air | ASTMD865 | 0.0 % | |
| Change rate of ultimate elongation in air | ASTMD865 | -28 % | |
| The rate of change in hardness of an air hardness tester | ASTMD865 | 5.0 | |
| Change rate of tensile strength | ASTMD471 | -5.0 % | |
| ASTMD471 | -18 % | ||
| Change rate of ultimate elongation | ASTMD471 | -25 % | |
| ASTMD471 | -19 % | ||
| The rate of change in hardness of a hardness tester | ASTMD471 | -11 | |
| volume change | ASTMD471 | 0.20 % | |
| ASTMD471 | 19 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD5688 | 0.40 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top