Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.16 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 4.0 g/10min |
| Shrinkage rate | | ASTMD955 | 0.20到0.60 % |
| Water absorption rate | | ASTMD570 | 0.40 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 53 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTMD1003 | 84.0 % |
| Haze ratio | | ASTMD1003 | 4.0 % |
| refractive index | | ASTMD542 | 1.470 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 1860 MPa |
| bending strength | Yield | ASTMD790 | 55.2 MPa |
| tensile strength | Yield | ASTMD638 | 32.4 MPa |
| elongation | Break | ASTMD638 | 110 % |
| Tensile modulus | | ASTMD638 | 1590 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 120 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTMD648 | 67.2 °C |
| Heat distortion temperature | | ASTMD648 | 62.2 °C |
| vicat | | ASTMD15252 | 73.9 °C |
| vicat | | ASTMD15253 | 68.3 °C |
| thermal conductivity | | ASTMC177 | 0.23 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare