Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | Internal | 0.5-0.8 |
| Shrinkage rate | | Internal | 0.8-1.1 |
| Shrinkage rate | | Internal | 0.4-0.6 |
| Shrinkage rate | | Internal | 0.6-0.9 |
| Water absorption rate | | ASTM D570 | 0.07 |
| specific volume | | ASTM D792 | 0.71 cm³/g |
| Thermal Properties | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM E831 | 21.6 E-6/°C |
| Linear coefficient of thermal expansion | | ASTM E831 | 21.6 E-6/°C |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Hardness (Rockwell R) | | ASTM D785 | 118 R |
| combustibility | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | 0.71 mm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 93 Mpa |
| elongation at break | | ASTM D638 | 5 % |
| bending strength | | ASTM D790 | 144 Mpa |
| Flexural modulus | | ASTM D790 | 4820 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 53 J/m |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 534 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices