Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO1133 | 23.0 cm3/10min |
| Shrinkage rate | | ISO294-4 | 0.62 % |
| Shrinkage rate | | ISO294-4 | 0.18 % |
| Shrinkage rate | | ISO294-4 | 0.22 % |
| Shrinkage rate | | ISO294-4 | 0.080 % |
| Water absorption rate | | ISO62 | 5.0 % |
| Water absorption rate | | ISO62 | 1.5 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 800 °C |
| Extreme Oxygen Index 7 | | ISO4589-2 | 32 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | ISO1874 | PA6,GFHR,14-110,GF30;ISO1043-PAGFFR(30+40+72) |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile strain | | ISO527-2/5 | 3.0 % |
| Flexural modulus | | ISO178/A | 9800 Mpa |
| Bending stress | | ISO178/A | -- Mpa |
| Bending stress | | ISO178 | 210 Mpa |
| Bending stress | | | 2.7 % |
| Tensile modulus | | ISO527-2/1 | 10800 Mpa |
| Tensile stress | | ISO527-2/5 | 150 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 60 kJ/m² |
| | ISO180/1U | 55 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC60243-1 | 37 KV/mm |
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 218 °C |
| | ISO75-2/A | 204 °C |
| vicat | | ISO306/B120 | 210 °C |
| Melting temperature 5 | | ISO11357-3 | 224 °C |
| | ISO11359-2 | 2.2E-05 cm/cm/°C |
| | ISO11359-2 | 8.1E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices