POM GH-25XAP JAPAN POLYPLASTIC

Form：Granules

Properties:

wear resistantHigh temperature resistanFiller: Glass fiber reinf25% filler by weight

Typical Applications:

Fitness equipmentAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Automotive Applications
Properties:	wear resistant \| High temperature resistan \| Filler: Glass fiber reinf \| 25% filler by weight

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Wear factor	0.060MPa,0.15m/sec7	JISK7218	10000	10^-8mm³/N·m
	Wear factor	0.49MPa,0.30m/sec6	JISK7218	7000	10^-8mm³/N·m
		Wear factor	0.49MPa,0.30m/sec5	JISK7218	400	10^-8mm³/N·m
		Wear factor	Wear factor	0.060MPa,0.15m/sec4	JISK7218	300	10^-8mm³/N·m
Friction coefficient	Steel - Dynamic3	JISK7218	0.60
Friction coefficient	Friction coefficient	Dynamic2	JISK7218	0.37
bending strength		ISO 178	196	Mpa
Bending modulus		ISO 178	7900	Mpa
Tensile strain	Break	ISO 527-2	2.4	%
tensile strength		ISO 527-2	136	Mpa
Tensile modulus		ISO 527-2	8500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD：23to55°C	Internal Method	9E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：23to55°C	Internal Method	3E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	162	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.60	%
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	9.00	cm3/10min
melt mass-flow rate	190°C/2.16kg	ISO 1133	12	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	3.00mm	IEC 60243-1	24	KV/mm
Volume resistivity		IEC 60093	5E+13	ohms·cm
Surface resistivity		IEC 60093	4E+16	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	95
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			CF3500/CD3501

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top