Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.37 g/cm³ |
| Melt volume flow rate | | ISO1133 | 70.0 cm3/10min |
| Shrinkage rate | | ISO294-4 | 0.86 % |
| Shrinkage rate | | ISO294-4 | 0.82 % |
| Water absorption rate | | ISO62 | 2.2 % |
| Water absorption rate | | ISO62 | 0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO2039-1 | 154 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak |
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak |
| Impact strength of cantilever beam gap | | ISO180 | 7.5 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180 | 7.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179 | 7.5 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 2650 Mpa |
| Tensile stress | | ISO527-2 | 85.0 Mpa |
| Tensile strain | | ISO527-2 | 6.9 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+13 ohms·cm |
| dielectric strength | | IEC60243-1 | 37 KV/mm |
| dielectric constant | | IEC60250 | 3.90 |
| dielectric constant | | IEC60250 | 3.80 |
| Dissipation Factor | | IEC60250 | 1.7E-03 |
| Dissipation Factor | | IEC60250 | 0.014 |
| CTI | | IEC60112 | 125 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Imp | | UL746 | 180 °C |
| RTI Imp | | UL746 | 180 °C |
| RTI Str | | UL746 | 190 °C |
| RTI Str | | UL746 | 190 °C |
| | ISO75-2/A | 205 °C |
| | | 5.2E-05 cm/cm/°C |
| RTI Elec | | UL746 | 180 °C |
| RTI Elec | | UL746 | 180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices