MDPE Moharamplast MDPE MP3840U Moharamplast S.A.E
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.938 g/cm³ | |
| Apparent density | ASTM D1895 | 0.37 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 4.0 g/10min | |
| Environmental stress cracking resistance | ASTM D1693 | >200 hr | |
| particle size distribution | ASTM D1921 | 500 µm |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 62 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTM D638 | >1000 % |
| Flexural modulus | ASTM D790 | 750 MPa | |
| tensile strength | Yield | ASTM D638 | 18.0 MPa |
| Break | ASTM D638 | 17.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ASTM D6110 | 20 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-70.0 °C | |
| vicat | ASTM D1525 | 117 °C | |
| melting temperature | ASTM D2117 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top