MF MELMEX SMX BIP (Oldbury) Limited
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 105.0 mg | |
| Shrinkage rate | ISO 2577 | 0.70 % | |
| density | ISO 1183 | 1.53 g/cm³ | |
| Shrinkage rate | ISO 2577 | 0.75 % | |
| Water absorption rate | ISO 62 | 37.0 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/C | 2.2 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 8.5 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ISO 178 | 99.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 5.9 kV/mm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60167 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Ae | 164 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top