Share
Add to compare

Epoxy EPO-TEK® 354 Epoxy Technology Inc.

Typical Applications:
Medical nursing supplies adhesives seals electrical electronic applications
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Medical | nursing supplies | adhesives | seals | electrical | electronic applications

Certificates

No Data...

Technical Data Sheet

Cured PropertiesTest ConditionTest MethodTest ResultTest Unit
Dissipation factor1kHz4E-03
Volume resistivity23°C>2.0E+13ohms·cm
Relative permittivity1kHz3.48
LapShearStrength23°C11.5MPa
Shore hardnessShoreD82
Uncured PropertiesTest ConditionTest MethodTest ResultTest Unit
densityPot Life4300min
density固化时间(150°C)1.0hr
density粘度8(23°C)4.0to6.0Pa·s
densityPartA1.20g/cm³
Color--6Amber
Color--7Clear/Transparent
densityPartB1.15g/cm³
optical performanceTest ConditionTest MethodTest ResultTest Unit
transmissivity800nm>99.0%
transmissivity600nm>96.0%
Refractive index1.573
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting componentsShelf Life(23°C)52wk
Thermosetting componentsPartB按重量计算的混合比:1.0
Thermosetting componentsPartA按重量计算的混合比:10
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Linear coefficient of thermal expansionMD:--41.8E-04cm/cm/°C
Linear coefficient of thermal expansionMD:--39.6E-05cm/cm/°C
Glass transition temperature>95.0°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Ionic typeNH4+300ppm
Ionic typeCl-81ppm
Ionic typeK+9ppm
Ionic typeNa+17ppm
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
DegradationTemperatureTGA487°C
Shear Strength23°C23.4MPa
weight loss on heating200°C0.50%
operate temperatureStorageModulus(23°C)2.46GPa
weight loss on heating250°C0.70%
weight loss on heating300°C0.85%
operate temperatureIntermittent-55-350°C
operate temperatureContinuous-55-250°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.