PC KumhoSunny PC/AES HEC0245 Shanghai KumhoSunny Plastics Co., Ltd.

Usages:
Applications in thin-walled components and automotive fields
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.08 g/cm³
density	density		ISO 1183	1.12 g/cm³
melt mass-flow rate		ASTM D1238	20 g/10min
Shrinkage rate		ASTM D955	0.50to0.70 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.50to0.70 %

Mechanical properties	Test Condition	Test Method	Test Result
elongation	Break	ASTM D638	60 %
Flexural modulus		ASTM D790	1900 MPa
Flexural modulus	Flexural modulus		ISO 178	2000 MPa
tensile strength		ASTM D638	53.0 MPa
tensile strength	tensile strength		ISO 527-2/50	50.0 MPa
bending strength		ASTM D790	70.0 MPa
bending strength	bending strength		ISO 178	63.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	32 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179	48 kJ/m²
Impact strength of simply supported beam without notch		ISO 179	无断裂
Impact strength of cantilever beam gap		ASTM D256	500 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180	45 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	100 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	96.0 °C
vicat		ISO 306/B50	110 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top