PPE 100Z-A1A3313 ASAHI JAPAN

Form：Granules | Grade：Injection grade

Properties:

Chemical resistanceFlame retardant

Typical Applications:

Fitness equipmentAutomotive interior parts

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Automotive interior parts
Properties:	Chemical resistance \| Flame retardant

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179	16	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0mm	UL 94	5VA
UL flame retardant rating	UL flame retardant rating	1.5mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	66.0	Mpa
Bending modulus	23°C	ISO 178	2370	Mpa
Nominal tensile fracture strain	23°C	ISO 527-2	30	%
tensile strength	Yield,23°C	ISO 527-2	37.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：-30to65°C	ISO 11359-2	8E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	78.0	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	85.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	2.00mm	Internal Method	0.50-0.70	%
Water absorption rate	23°C,24hr	ISO 62	0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 60250	4E-03
Dissipation factor	Dissipation factor	100Hz	IEC 60250	3E-03
Dielectric constant	1MHz	IEC 60250	2.90
Dielectric constant	Dielectric constant	100Hz	IEC 60250	2.90
Dielectric strength	2.00mm	IEC 60243-1	29	KV/mm
Volume resistivity	23°C	IEC 60093	1E+16	ohms·cm
Surface resistivity		IEC 60093	1E+16	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top