SPS XAREC™ S942RF IDEMITSU JAPAN
384
- Properties:High temperature resistanGlass fiber reinforcedFiller/fiberglass reinfor40% weight filler
- Usages:Household daily necessitiElectrical applicationshousehold electrical applAutomotive ApplicationsLaptop caseElectrical/Electronic AppMembrane touch switchpipeline
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.070 | % |
| Shrinkage rate | Flow | ASTM D-955 | 0.25 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile yield strength | ASTM D-638 | 115 | Mpa | |
| Tensile yield elongation | ASTM D-638 | 1.5 | % | |
| Bending modulus | ASTM D-790 | 12000 | Mpa | |
| bending strength | ASTM D-790 | 175 | Mpa | |
| Rockwell hardness | ASTM D-785 | 75 | M-scale |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa，未退火 | ASTM D-648 | 268 | °C |
| 1.80MPa，未退火 | ASTM D-648 | 245 | °C | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000023 | cm/cm/℃ |
| Flame retardant grade | 0.0312mm | UL 94 | V-0 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+16 | ohm.cm | |
| Electrical strength | ASTM D-149 | 35.0 | KV/mm | |
| Dielectric constant | 1E+6Hz | ASTM D-150 | 3.100 | |
| Dielectric loss factor | 1E+6Hz | ASTM D-150 | 0.0030 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top