Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.42 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.19 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 114 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Limiting Oxygen Index | | ASTMD2863 | 50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 6890 MPa |
| bending strength | Yield | ASTMD790 | 207 MPa |
| Compression Modulus | | ASTMD695 | 5580 MPa |
| compressive strength | | ASTMD695 | 198 MPa |
| Tensile modulus | | ASTMD638 | 6890 MPa |
| tensile strength | Yield | ASTMD638 | 139 MPa |
| tensile strength | Break | ASTMD638 | 131 MPa |
| elongation | Break | ASTMD638 | 4.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 85 J/m |
| Suspended wall beam without notch impact strength | | ASTMD256 | 480 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 7E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 26 kV/mm |
| dielectric constant | | ASTMD150 | 3.50 |
| Dissipation Factor | | ASTMD150 | 1.5E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 210 °C |
| | ASTMD648 | 209 °C |
| | ASTMD696 | 2.5E-05 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.25 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare