Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.88 g/cm³ |
| Apparent density | | ASTMD1895 | 0.65 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.10 % |
| Water absorption rate | | ASTMD570 | 0.050 % |
| Water absorption rate- | | ASTMD570 | 0.15 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 100 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256A | 80 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 75.0 MPa |
| Flexural modulus | | ASTMD790 | 18600 MPa |
| bending strength | | ASTMD790 | 110 MPa |
| compressive strength | | ASTMD695 | 224 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| arc resistance | | ASTMD495 | 185 sec |
| dielectric strength | | ASTMD149 | 14 kV/mm |
| dielectric strength | | ASTMD149 | 11 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTME831 | 3.9E-05 cm/cm/°C |
| thermal conductivity | | ASTMC518 | 0.74 W/m/K |
| RTI Elec | | UL746 | 150 °C |
| RTI Imp | | UL746 | 150 °C |
| RTI | | UL746 | 150 °C |
| | ASTMD648A | 280 °C |
| | ASTMD648A | >282 °C |
| | ASTME831 | 1.7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare