Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | 内部方法 | 0.50-0.70 % |
| Water absorption rate | | ISO 62 | 0.10 % |
| Outdoor applicability | | UL 746C | f1 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | 5VA |
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-2 | 49.0 Mpa |
| Nominal tensile fracture strain | | ISO 527-2 | 10 % |
| Flexural modulus | | ISO 178 | 2300 Mpa |
| bending strength | | ISO 178 | 80.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179 | 15 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | 1E+16 ohms |
| Volume resistivity | | IEC 60093 | 1E+16 ohms·cm |
| dielectric strength | | IEC 60243-1 | 29 KV/mm |
| dielectric constant | | IEC 60250 | 2.90 |
| dielectric constant | | IEC 60250 | 2.90 |
| Dissipation Factor | | IEC 60250 | 3E-03 |
| Dissipation Factor | | IEC 60250 | 4E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 90.0 °C |
| Heat distortion temperature | | ISO 75-2/A | 83.0 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 7.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices