PET 9L22120 HL

0
  • Properties:
    Filler
    glass fiber reinforced material
    20%
    filler by weight

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.48 g/cm³
Shrinkage rate1.0 %
Shrinkage rate0.30 %
Water absorption rateISO 620.20 %
water contentISO 960<800 ppm
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94HB
UL flame retardant ratingUL 94HB
Hot filament ignition temperatureIEC 60695-2-13750 °C
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength ISO 527-2/5120 MPa
Tensile strainISO 527-2/52.5 %
Tensile modulusISO 527-2/58000 MPa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 179/1eA7.0 kJ/m²
Charpy Notched Impact StrengthISO 179/1eA8.0 kJ/m²
Impact strength of simply supported beam without notchISO 179/1eU25 kJ/m²
Impact strength of simply supported beam without notchISO 179/1eU30 kJ/m²
Impact strength of cantilever beam gapISO 180/1A6.0 kJ/m²
Impact strength of cantilever beam gapISO 180/1A7.0 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityIEC 600931E+16 ohms·cm
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 3
Surface ResistivityIEC 600931E+14 ohms
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureISO 75-2/B230 °C
Heat distortion temperatureISO 75-2/A200 °C
vicatISO 306/B220 °C
melting temperatureISO 11357250 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top