HDPE KW Plastics KWR105M2 KW Plastics
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.947 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 4.0 g/10min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| polypropylene | ASTM D5576 | 15 % | |
| weight loss on heating | 内部方法 | <0.10 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 20.7 MPa |
| Flexural modulus | ASTM D790 | 862 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 110 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top