HDPE B53-35H-011 INEOS USA

Form：Granules | Grade：Impact resistant grade

Properties:

Resistance to stress crachigh strength

Typical Applications:

Food service sectorMedical SuppliesBlow molding applications

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Food service sector \| Medical Supplies \| Blow molding applications
Properties:	Resistance to stress crac \| high strength

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	0.35	g/10min
density		ASTM D-792	0.955
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D-638	27.6	Mpa
Impact strength of cantilever beam gap		ASTM D-638	277	KJ/m
Elongation at Break		ASTM D-638	>700	%
Shore hardness		ASTM D-2240	65
Bending modulus		ASTM D-790	1241	Mpa
Impact strength of cantilever beam gap		ASTM D-256	0.19	KJ/m
Shore hardness		ASTM D-747	690	Mpa
Tensile modulus		ASTM D-638	1497	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D-1525	131	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top