PI, TP 35N Arlon-MED

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-1
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		Internal Method	22100	MPa
Poisson's ratio		ASTM D3039	0.15
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：>250°C8	Internal Method	1.6E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：<250°C8	Internal Method	5.1E-05	cm/cm/°C
thermal conductivity	100°C	ASTME1461	0.20	W/m/K
Linear coefficient of thermal expansion	MD：--7	Internal Method	1.6E-05	cm/cm/°C
Glass transition temperature		Internal Method	>250	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792A	1.60	g/cm³
decomposition temperature	Intial	Internal Method	363	°C
decomposition temperature	decomposition temperature	5%	Internal Method	407	°C
Water absorption rate	24hr	Internal Method	0.26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		Internal Method	165	sec
Surface resistivity	--10	Internal Method	3.7E+14	ohms
Dissipation factor	1MHz	Internal Method	0.010
Dielectric constant	1MHz	Internal Method	4.20
Dielectric strength		Internal Method	56	kV/mm
Volume resistivity	--10	Internal Method	1.2E+14	ohms·cm
Volume resistivity	Volume resistivity	--9	Internal Method	1.6E+14	ohms·cm
Surface resistivity	--9	Internal Method	5E+14	ohms
film	Test Condition	Test Method	Test Result	Test Unit
Peel strength	--6	Internal Method	1.0	kN/m
	Peel strength	--5	Internal Method	1.1	kN/m
	Peel strength	Peel strength	--4	Internal Method	1.1	kN/m
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
t		Internal Method	11.0	min
	t		Internal Method	>1.0	hr
	t	t		Internal Method	>1.0	hr
expansion rate	50to260°C	Internal Method	1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top