HDPE 5300B
679
- Properties:Type: Blow molding
- Usages:Plastic bottleDetergent bottleCosmetic bottles.
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 0.40 g/10min | ||
| density | 0.952 g/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ash content | 0.03 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental stress cracking resistance | 600 | ||
| elongation at break | 500 K/M | ||
| Impact strength of cantilever beam gap | 78 J/m | ||
| Stretching length | 23.5 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | -70 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top