Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.21 g/cm³ |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| STORAGE STABILITY | | | 1.5 min |
| stripping time | | | 15 min |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 16 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 965 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 750到960 J/m |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ASTMD412 | 34.5 MPa |
| tensile strength | | ASTMD412 | 55.2 MPa |
| elongation | Break | ASTMD412 | 210 % |
| tear strength | Split | ASTMD470 | 21 kN/m |
| compression set | | ASTMD395A | 1.0 % |
| compression set | | ASTMD395B | 55 % |
| Basho elasticity | | ASTMD2632 | 35 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -57.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare