
GPPS 535HF ZHANJIANG NEW ZHONGMEI
204
Form:Granules | Grade:Injection grade
Properties:
heat-resistinghigh strengthHigh transparencyLow to medium flowHigh transparencyhigh strengthHigh heat resistanceComplies with food hygien
Typical Applications:
Household goodsElectrical appliancesToyBathroom accessoriesUsed for making imitation glass productsBathroom suppliesToyThick walled products such as household items and
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Household goods | Electrical appliances | Toy | Bathroom accessories | Used for making imitation glass products | Bathroom supplies | Toy | Thick walled products such as household items and |
| Properties: | heat-resisting | high strength | High transparency | Low to medium flow | High transparency | high strength | High heat resistance | Complies with food hygien |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Residual amount of monomer | GasChrom | 600 | ppm | |
| bending strength | ASTM D-790 | 85 | Mpa | |
| machinability | Test Condition | Test Method | Test Result | Test Unit |
| Forming method | Method | 挤出注塑 | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D-1238 | 3.5 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ASTM D-638 | 50 | Mpa | |
| Bending modulus | ASTM D-790 | 3300 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D-1525 | 99 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 1.04 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.